Hydraulic Pump excavator 20V 25V 35V 45V for engineering machinery
| Mounting: |
76.0 LB |
| Controlled Flow Rate: |
Flange Mount |
| GPM @ 1,800 rpm, Cover End: |
Right Hand (CW) |
| Max. RPM [Max: |
3525VQ30A21-11CC20 |
| Shaft End Pressure [Max: |
3 |
| Shaft Dia.: |
Flange |
| Shaft Length: |
N/A |
| Spline Description: |
Standard Pilot |
| PDF |
|
Product Details
| Mounting |
76.0 LB |
| Controlled Flow Rate |
Flange Mount |
| GPM @ 1,800 rpm, Cover End |
Right Hand (CW) |
| Max. RPM [Max |
3525VQ30A21-11CC20 |
| Shaft End Pressure [Max |
3 |
| Shaft Dia. |
Flange |
| Shaft Length |
N/A |
| Spline Description |
Standard Pilot |
| Cover End RPM [Max |
1.25 in |
| Major Diameter [Max |
14 Tooth Splined |
| Minor Diameter [Max |
3525VQ |
| Shaft Key |
1 15/16 in |
| Model No. |
Buna-N |
| Port Type |
2500 |
| Shaft Seal Type |
1.04 in |
| Shaft End Flow @ RPM |
SAE C, 2 Bolt |
| Port Orientation - Cover End |
Single Shaft Seal |
| Weight |
12/24 |
| Port Size |
2500 |
| Rotation |
2500 |
| Relief Valve Setting |
N/A |
| Integral Valve Configuration |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) |
1.248 in |
| Pump Series |
1.247 in |
| Cover End Pressure [Max |
N/A |
| Minor Diameter |
N/A |
| Port Orientation - Shaft End |
N/A |
| GPM @ 1,800 rpm, Shaft End |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Pilot Type |
3525VQ30A21-11CC20 |
| Shaft Type |
3000 |
| Shaft End RPM [Max |
3000 |
| Mounting Flange |
31.5 |
| Pressure Port Size, Cover End |
45 |
| Pressure Port Size, Shaft End |
w/o Integral Valves |
| Seal Material |
Outlet 45° CW from Inlet |
| Displacement Cover End (cu in/revolution) |
Outlet Inline w/Inlet |
| Minor Diameter [Min |
1 in Flange |
| Major Diameter [Min |
1 1/4 in Flange |
| Cover End Flow @ RPM |
4.12 |
| Manufacturer Part No. |
5.96 |
Company Profile
| Worktime |
9.00-18.00 |
| Phone |
966-25314872 |