imo slewing ring
imo slewing ring Engineering BOD Bearing Supplies Trading Est Calculator , 69 mm da min Slewing Bearing Manufacturing 77,6 mm d1 Service . Get Your Free.
| Port Orientation - Cover End: | 50.0 LB |
| Cover End RPM [Max: | Flange Mount |
| Mounting: | Right Hand (CW) |
| Relief Valve Setting: | 38 gal/min @ 1200 rpm |
| GPM @ 1,800 rpm, Cover End: | 35VQ38A-11C20 |
| Shaft Type: | 2 |
| Weight: | Flange |
| Minor Diameter: | N/A |
Product Details
| Port Orientation - Cover End | 50.0 LB |
| Cover End RPM [Max | Flange Mount |
| Mounting | Right Hand (CW) |
| Relief Valve Setting | 38 gal/min @ 1200 rpm |
| GPM @ 1,800 rpm, Cover End | 35VQ38A-11C20 |
| Shaft Type | 2 |
| Weight | Flange |
| Minor Diameter | N/A |
| Rotation | 20 |
| Pump Series | 38 gpm @ 1200 rpm |
| Shaft End Flow @ RPM | 11 |
| Max. RPM [Max | 1.25 in |
| Minor Diameter [Max | 14 Tooth Splined |
| Mounting Flange | 57 gpm @ 1800 rpm |
| Model No. | 35VQ |
| Cover End Pressure [Max | 1 15/16 in |
| Port Orientation - Shaft End | Single |
| Integral Valve Configuration | None |
| Shaft End Pressure [Max | 1 1/4 in Flange |
| Pressure Port Size, Cover End | Buna-N |
| GPM @ 1,800 rpm, Shaft End | 2400 |
| Manufacturer Part No. | 3000 psi |
| Port Type | 57 |
| Shaft Length | A |
| Displacement Shaft End (cu in/revolution) | SAE C, 2 Bolt |
| Shaft End RPM [Max | Single Shaft Seal |
| Spline Description | Inline w/ Inlet |
| Seal Material | 35VQ38A-11C20 |
| Pilot Type | 7.4 |
| Controlled Flow Rate | w/o Integral Valves |
Company Profile
| Worktime |
9.00-18.00 |
| Phone |
966-25314872 |
