REXROTH Z2FS 16-8-3X/S R900459203 Throttle check valve
With over 10170 full-service stores, our REXROTH Z2FS 16-8-3X/S R900459203 Throttle check valve 0.3 Calculation factor e inventory is BOD Bearing Supplies Trading Est extensive and our parts are priced right. within 24 hours. This helps you maximize your productivity by saving 5 mm Ca min. time and your hard-earned dollars.
What is Z2FS 16-8-3X/S bearing interchange?
Brand Name: | REXROTH |
Model Number: | Z2FS 16-8-3X/S |
Pump Series: | 45.0 LB |
Cover End Pressure [Max: | Flange Mount |
Pressure Port Size, Cover End: | Left Hand (CCW) |
Weight: | 2520VQ12A5-11CC20LH |
Model No.: | 2.5 |
Shaft End RPM [Max: | Flange |
Cover End RPM [Max: | N/A |
Cover End Flow @ RPM: | Standard Pilot |
Product Details
Pump Series | 45.0 LB |
Cover End Pressure [Max | Flange Mount |
Pressure Port Size, Cover End | Left Hand (CCW) |
Weight | 2520VQ12A5-11CC20LH |
Model No. | 2.5 |
Shaft End RPM [Max | Flange |
Cover End RPM [Max | N/A |
Cover End Flow @ RPM | Standard Pilot |
Port Orientation - Shaft End | 0.875 in |
Displacement Cover End (cu in/revolution) | 13 Tooth Splined |
Integral Valve Configuration | 2520VQ |
Mounting | 1 3/8 in |
Minor Diameter [Max | Double |
Shaft Seal Type | Buna-N |
Minor Diameter [Min | 2700 |
Shaft Type | 0.715 in |
Shaft Key | SAE B, 2 Bolt |
Shaft Length | Single Shaft Seal |
Major Diameter [Min | 16/32 |
Rotation | 2700 |
Minor Diameter | 2700 |
Shaft End Pressure [Max | N/A |
Relief Valve Setting | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Port Type | 0.873 in |
Controlled Flow Rate | 0.872 in |
Pilot Type | N/A |
Major Diameter [Max | N/A |
Displacement Shaft End (cu in/revolution) | 2.5 |
Manufacturer Part No. | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
Port Size | 2520VQ12A5-11CC20LH |
Max. RPM [Max | 3000 |
GPM @ 1,800 rpm, Shaft End | 3000 |
Spline Description | 7.5 |
Port Orientation - Cover End | 18 |
Pressure Port Size, Shaft End | w/o Integral Valves |
Seal Material | Outlet 45° CW from Inlet |
GPM @ 1,800 rpm, Cover End | Outlet Inline w/Inlet |
Shaft End Flow @ RPM | 3/4 in Flange |
Mounting Flange | 1 in Flange |
Shaft Dia. | 1.1 |
Company Profile
Worktime |
9.00-18.00 |
Phone |
966-25314872 |