ntn ukp210d1
| Shaft Key: |
76.0 LB |
| Pilot Type: |
Flange Mount |
| Displacement Cover End (cu in/revolution): |
Left Hand (CCW) |
| Minor Diameter [Min: |
3525VQ38A17-11CC20-LH |
| GPM @ 1,800 rpm, Shaft End: |
3 |
| Manufacturer Part No.: |
Flange |
| Seal Material: |
N/A |
| Shaft Dia.: |
Standard Pilot |
Product Details
| Shaft Key |
76.0 LB |
| Pilot Type |
Flange Mount |
| Displacement Cover End (cu in/revolution) |
Left Hand (CCW) |
| Minor Diameter [Min |
3525VQ38A17-11CC20-LH |
| GPM @ 1,800 rpm, Shaft End |
3 |
| Manufacturer Part No. |
Flange |
| Seal Material |
N/A |
| Shaft Dia. |
Standard Pilot |
| Pressure Port Size, Shaft End |
1.25 in |
| Shaft Seal Type |
14 Tooth Splined |
| Displacement Shaft End (cu in/revolution) |
3525VQ |
| Integral Valve Configuration |
1.9375 in |
| Shaft End RPM [Max |
Buna-N |
| Model No. |
2400 |
| Major Diameter [Min |
1.04 in |
| Mounting |
SAE C, 2 Bolt |
| Port Size |
Single Shaft Seal |
| Shaft End Flow @ RPM |
12/24 |
| Relief Valve Setting |
2500 |
| Spline Description |
2400 |
| Pressure Port Size, Cover End |
N/A |
| Cover End Flow @ RPM |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Major Diameter [Max |
1.248 in |
| GPM @ 1,800 rpm, Cover End |
1.247 in |
| Controlled Flow Rate |
N/A |
| Cover End Pressure [Max |
N/A |
| Shaft Length |
N/A |
| Mounting Flange |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Port Orientation - Shaft End |
3525VQ38A17-11CC20-LH |
| Shaft End Pressure [Max |
3000 |
| Weight |
3000 |
| Shaft Type |
25.5 |
| Cover End RPM [Max |
57 |
| Minor Diameter |
w/o Integral Valves |
| Port Orientation - Cover End |
Outlet 45° CW from Inlet |
| Rotation |
Outlet Inline w/Inlet |
| Port Type |
1 in Flange |
| Max. RPM [Max |
1 1/4 in Flange |
| Pump Series |
3.37 |
| Minor Diameter [Max |
7.42 |
Company Profile
| Worktime |
9.00-18.00 |
| Phone |
966-25314872 |