ntn ukp210d1
| Shaft Key: | 76.0 LB |
| Pilot Type: | Flange Mount |
| Displacement Cover End (cu in/revolution): | Left Hand (CCW) |
| Minor Diameter [Min: | 3525VQ38A17-11CC20-LH |
| GPM @ 1,800 rpm, Shaft End: | 3 |
| Manufacturer Part No.: | Flange |
| Seal Material: | N/A |
| Shaft Dia.: | Standard Pilot |
Product Details
| Shaft Key | 76.0 LB |
| Pilot Type | Flange Mount |
| Displacement Cover End (cu in/revolution) | Left Hand (CCW) |
| Minor Diameter [Min | 3525VQ38A17-11CC20-LH |
| GPM @ 1,800 rpm, Shaft End | 3 |
| Manufacturer Part No. | Flange |
| Seal Material | N/A |
| Shaft Dia. | Standard Pilot |
| Pressure Port Size, Shaft End | 1.25 in |
| Shaft Seal Type | 14 Tooth Splined |
| Displacement Shaft End (cu in/revolution) | 3525VQ |
| Integral Valve Configuration | 1.9375 in |
| Shaft End RPM [Max | Buna-N |
| Model No. | 2400 |
| Major Diameter [Min | 1.04 in |
| Mounting | SAE C, 2 Bolt |
| Port Size | Single Shaft Seal |
| Shaft End Flow @ RPM | 12/24 |
| Relief Valve Setting | 2500 |
| Spline Description | 2400 |
| Pressure Port Size, Cover End | N/A |
| Cover End Flow @ RPM | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Major Diameter [Max | 1.248 in |
| GPM @ 1,800 rpm, Cover End | 1.247 in |
| Controlled Flow Rate | N/A |
| Cover End Pressure [Max | N/A |
| Shaft Length | N/A |
| Mounting Flange | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Port Orientation - Shaft End | 3525VQ38A17-11CC20-LH |
| Shaft End Pressure [Max | 3000 |
| Weight | 3000 |
| Shaft Type | 25.5 |
| Cover End RPM [Max | 57 |
| Minor Diameter | w/o Integral Valves |
| Port Orientation - Cover End | Outlet 45° CW from Inlet |
| Rotation | Outlet Inline w/Inlet |
| Port Type | 1 in Flange |
| Max. RPM [Max | 1 1/4 in Flange |
| Pump Series | 3.37 |
| Minor Diameter [Max | 7.42 |
Company Profile
| Worktime |
9.00-18.00 |
| Phone |
966-25314872 |
